Sign In | Join Free | My dvasoft.com
dvasoft.com
Shijiazhuang JieMu Machinery Equipment Co.,Ltd
Good Faith-based Technology as First
Home > Electric Centrifugal Pump >

10/8S-G Sugar Plant Electric Centrifugal Pump , sand suction pump

Shijiazhuang JieMu Machinery Equipment Co.,Ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Shijiazhuang JieMu Machinery Equipment Co.,Ltd
City: Shijiazhuang
Province/State: Hebei
Country/Region: China
Tel: 86-311-80660278

10/8S-G Sugar Plant Electric Centrifugal Pump , sand suction pump

Brand Name : Gempump
Model Number : 10/8S-G(H)
Certification : ISO9001
Place of Origin : Hebei, China
MOQ : 1 Set
Price : 1000 USD/Set
Payment Terms : T/T
Supply Ability : 50/Month
Packaging Details : Standard Export Wooden Case Or By Required
Model : 10/8S-G(H)
Port : Beijing, Tianjin
Color : Light green Or Other
Sealing type : Gland seal, Mechanical seal, Expeller seal
Applications : Dredging in dredger and course of rivers etc.
Transmission : variable frequency drive, SCR speed and so on
Contact Now

10/8S-G Sugar Plant Electric Centrifugal Pump , sand suction pump


Applications

  • The utility model is suitable for conveying mud, metal melting, explosive mud, dredging boats, river dredging, etc. in mines.
Feature
  • TType GH is a high lift pump. Dredging sand flushing mud pump. Marine sand pump. Dredging mud pump. Pump for sugar refinery. Mud pump for Tailings Transportation​

Water pump failure analysis and treatment



Different types of pumps, the failure of the form of expression is not the same, but in general, there are 5 common characteristics.


(1) insufficient flow;
Causes: lack of impact of water flow is the water pipe leakage, valve leakage; water plugging; water depth at the end of valve insufficiency; the pump speed is too low; the impeller sealing ring or excessive wear; high water exceed the standard.
Treatment methods: check valve and water pipe, blocked the leak source; clean water inlet sludge or blockage; water depth at the end of valve must be greater than 1.5 times the diameter of the water inlet pipe, increase the water depth at the end of valve; check the power supply voltage, improve the pump speed, to replace the sealing ring or impeller; the installation of pumps to reduce or replace the high lift pump.


(2) power consumption is too large
Cause: pump speed is too high; pump shaft bending or pump shaft and motor shaft misalignment or not parallel; selection of the pump head is not suitable; pump suction or sediment blockage; motor ball bearing damage.
Treatment methods: check the circuit voltage, reduce the pump speed; the relative position correction of pump shaft or adjust the pump and motor; appropriate lift pump; clean sediment or blockage; the replacement of ball bearing motor.


(3) violent vibration or noise of pump body;
Causes: pump installation is not fixed or water pump installation is too high; motor ball bearing damage; water pump spindle bending or with the motor spindle is not concentric, not parallel.
Handling method: install the stable water pump or reduce the installation height of the water pump; replace the motor ball bearing; correct the bent main shaft of the pump or adjust the relative position of the pump and the motor.


(4) overheating of drive shaft or motor bearing;
Causes: lack of lubrication or bearing breakage.
How to do it: add lubricating oil or replace the bearings.


(5) the water pump does not produce water
Causes: pump body and suction pipe are not filled with water; the water level is lower than the water pump filter pipe; water pipe rupture.
Processing method: remove the end of valve failure, filled with water; reduce water pump installation, and make the water pipes under the water level in the dynamic, or moving water pipes or filters and then pumping; repair or replacement of water pipes.


PERFORMANCE

Pump ModelAllowable
Max. Power
(kw)
Clear Water Performance
Capacity QHead
H (m)
Speed
n(r/min)
Max.Eff.
(%)
NPSH
(m)
m3/hl/s
10/8S-GH560216-93660-2608-52500-1000653-7.5
10/8S-G560180-144050-40024-30500-950722.5-5
ModelOutlet diameter (mm)Speed (r/min)Flow
m³/h
Head (m)Effeciency (%)Motor Power (kw)Impeller diameter (mm)Maximum permissible particle size (mm)
10/8F-G200500216.00
352.80
489.60
12.50
12.00
10.80
60Y250M-8 30KW
Y280M-8 45KW
565178
10/8F-G200600244.00
432.00
594.00
18.00
17.10
15.50
60Y280M-8 45KW
Y315S-8 55KW
Y315M-8 75KW
565178
10/8F-G200700237.60
468.00
684.00
24.80
23.70
21.40
60Y315M-8 75KW
Y315L1-8 90KW
Y315L2-8 110KW
565178
10/8F-G200800306.00
540.00
792.00
32.00
31.00
28.00
60Y315M-6 90KW
Y315L2-6 132KW
JS126-6 155KW
565178
10/8F-G200900349.20
612.00
882.00
40.50
39.20
34.80
60Y315L2-6 132KW
JS126-6 155KW
JS127-6 185KW
565178
10/8S-GH200600388.80
630.00
810.00
32.00
30.00
28.00
60Y315M-8 75KW
Y315L1-8 90KW
Y315L2-8 110KW
711180
10/8S-GH200700443.00
731.00
943.00
43.20
40.80
38.00
60Y31512-8 110KW
Y315L2-6 132KW
JS128-8 155KW
711180
10/8S-GH200800504.00
839.00
56.50
52.80
60JS127-6 185KW711180
10/8S-GH200500-950750-130020-7570560686180



Product Tags:

high pressure centrifugal pump

      

stainless steel centrifugal pump

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

10/8S-G Sugar Plant Electric Centrifugal Pump , sand suction pump Images

Inquiry Cart 0
Send your message to this supplier
 
From:
Enter your email please.
To: Shijiazhuang JieMu Machinery Equipment Co.,Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0